Theory explainer
SCS Curve Number Practice Problems — FE/PE Civil Exam (NRCS Runoff Method)
The SCS (NRCS) curve number method turns one storm depth and one land-use index into a runoff depth. The exam points are not in the substitution — they are in building the right curve number: area-weighting a composite CN instead of averaging it, converting for dry or wet antecedent moisture, and checking the 0.2S threshold before you compute anything. Master those three moves and every curve-number question on the FE/PE Civil exams becomes a short, checkable routine.
Last reviewed: 2026-11-07. Every worked number below was independently re-solved; steps are shown in full.
Hydrologic soil groups: A to D
Every CN table entry depends on the soil's infiltration behaviour, grouped into four hydrologic soil groups (HSGs). The same land use can span a 20-plus-point CN range across the groups, so the soil group in the stem is never decoration:
| Group A | Low runoff potential. Deep, well-drained sands and gravels; high infiltration even when wet. The lowest CNs in every row of the table. |
|---|---|
| Group B | Moderate infiltration. Moderately deep, moderately drained soils — sandy loams and loess. The default group in most exam stems when one is named. |
| Group C | Slow infiltration. Soils with a layer that impedes drainage — clay loams, shallow sandy loams over clay. Noticeably higher CNs. |
| Group D | High runoff potential. Swelling clays, soils with a permanent high water table or a clay pan near the surface. The highest CNs — a group-D woodland can out-run a group-B lawn. |
Reading the CN table
Selected values from the NRCS TR-55 table (AMC II). Three things to notice: pavement is 98 on every soil; the spread between soil groups shrinks as cover gets more impervious; and "condition" (good/fair/poor) moves a natural cover by as much as a whole soil group does:
| Land use / cover | A B C D |
|---|---|
| Paved parking, roofs, driveways | 98 98 98 98 |
| Commercial & business (85% impervious) | 89 92 94 95 |
| Residential, ¼-acre lots (65% impervious) | 61 75 83 87 |
| Row crops, straight row, good condition | 67 78 85 89 |
| Pasture / range, good condition | 39 61 74 80 |
| Meadow (continuous grass), good condition | 30 58 71 78 |
| Woods, good condition | 30 55 70 77 |
| Fallow, bare soil | 77 86 91 94 |
Sanity anchors worth memorising: \(S = \frac{1000}{CN} - 10\) gives \(S = 10.0\,\text{in}\) at CN 50, \(S = 3.33\,\text{in}\) at CN 75, and \(S = 0.20\,\text{in}\) at CN 98. If your S lands outside roughly 0.2–23 in, you have misread the table or the formula — S falls as CN rises, because a high-CN surface retains almost nothing.
Composite CN: weight by area, never average
Real watersheds are patchworks. The composite curve number is the area-weighted mean of the patch values:
\[CN_{\text{composite}} = \Sigma \frac{(CN_{i} \times A_{i})}{\Sigma A_{i}}\]
The weighting matters most when a small, very high-CN patch (a car park at 98) sits inside a large, low-CN one \((woods at 55)\): area weighting lets the pavement pull the composite — and the runoff — up properly. A simple average of the CN values weights a 1-acre car park the same as 40 acres of woodland, which is exactly the error the exam's distractor answers are built on (Worked Problem 2).
Antecedent moisture conditions: AMC I, II, III
Table CNs are for AMC II, the average soil-moisture state. A stem that stresses a preceding dry spell (AMC I) or saturated ground after days of rain (AMC III) wants a converted CN:
CN(I) = CN(II) / \((2.281 - 0.01281 \cdot CN(II))\) CN(III) = CN(II) / \((0.427 + 0.00573 \cdot CN(II))\)
Direction check before you substitute: dry soil (AMC I) must give a lower CN and wet soil (AMC III) a higher CN than AMC II. For CN(II) = 80 the conversions give CN(I) ≈ 63.7 and CN(III) ≈ 90.4 — a swing of nearly 27 points, worth more than most table-reading decisions on the page (Worked Problem 3).
Worked problem 1 Single CN: runoff depth and volume (FE pace, US units)
Given: a 50-acre watershed with curve number \(CN = 75\) (AMC II) receives a storm of \(P = 5.0\,\text{in}\). Find the runoff depth and the runoff volume.
Solution:
- Retention: \(S = \frac{1000}{75} - 10\) = 3.33 in; initial abstraction \(I_{a} = 0.2 S\) = 0.67 in
- Threshold check: \(P = 5.0\,\text{in}\) > 0.67 in, so runoff occurs and the equation applies.
- \(Q = \frac{(5.0 - 0.667)^{2}}{(5.0 + 0.8 \times 3.333)} = \frac{(4.333)^{2}}{(5.0 + 2.667)} = \frac{18.78}{7.667}\) = 2.45 in
- Volume: Q is a depth — convert: \((\frac{2.45}{12}) \text{ft} \times 50\) ac = 10.2 ac-ft \((≈ 445000\,\text{ft}^{3})\)
Answer: \(Q \approx 2.45\,\text{in}\); volume ≈ 10.2 ac-ft. Trap note: 2.45 in is a depth over the whole watershed, not a flow. Stems that ask for volume are testing the /12 conversion at the last step — and stems that ask for a peak flow want the rational method, not this one.
Worked problem 2 Composite CN from three land uses (PE pace, US units)
Given: an 80-acre watershed, all hydrologic soil group B: 40 acres of woods in good condition \((CN 55)\), 25 acres of residential ¼-acre lots \((CN 75)\), and 15 acres of paved parking \((CN 98)\). For a storm of \(P = 4.0\,\text{in}\), find the runoff depth.
Solution:
- Area-weight the CN: \(CN = \frac{(40 \times 55 + 25 \times 75 + 15 \times 98)}{80} = \frac{(2200 + 1875 + 1470)}{80} = \frac{5545}{80}\) = 69.3
- \(S = \frac{1000}{69.3} - 10\) = 4.43 in; \(I_{a} = 0.2 \times 4.43\) = 0.886 in < \(P = 4.0\,\text{in}\), so runoff occurs.
- \(Q = \frac{(4.0 - 0.886)^{2}}{(4.0 + 0.8 \times 4.427)} = \frac{(3.114)^{2}}{(4.0 + 3.542)} = \frac{9.70}{7.542}\) = 1.29 in
Answer: composite \(CN \approx 69.3\); \(Q \approx 1.29\,\text{in}\). Trap note: the simple average of 55, 75 and 98 is 76 — seven points too high, because it pretends the 15 paved acres count as much as the 40 wooded ones. Weight by area, every time; the "76" path is a prepared distractor.
Worked problem 3 Dry antecedent moisture: AMC I adjustment (PE pace, US units)
Given: a watershed has CN(II) = 80, but a prolonged dry spell puts it at AMC I. Find the runoff from a storm of \(P = 3.5\,\text{in}\).
Solution:
- Convert: CN(I) = \(\frac{80}{(2.281 - 0.01281 \times 80)} = \frac{80}{(2.281 - 1.025)} = \frac{80}{1.256}\) = 63.7 — lower than 80, as a dry watershed must be.
- \(S = \frac{1000}{63.7} - 10\) = 5.70 in; \(I_{a} = 0.2 \times 5.70\) = 1.14 in < 3.5 in, so runoff occurs.
- \(Q = \frac{(3.5 - 1.14)^{2}}{(3.5 + 0.8 \times 5.70)} = \frac{(2.36)^{2}}{(3.5 + 4.56)} = \frac{5.57}{8.06}\) = 0.69 in
- Contrast: at AMC II \((CN 80, S = 2.50\,\text{in}, I_{a} = 0.50\,\text{in})\) the same storm gives \(Q = \frac{(3.0)^{2}}{(3.5 + 2.0)} = \frac{9.0}{5.5}\) = 1.64 in — the dry spell more than halves the runoff.
Answer: \(Q \approx 0.69\,\text{in}\) at AMC I (vs 1.64 in at AMC II). Trap note: running the AMC II number because "the table says 80" ignores the one fact the stem went out of its way to state. (For reference, the wet conversion runs the other way: CN(III) = \(\frac{80}{(0.427 + 0.00573 \times 80)} \approx 90.4\).)
Worked problem 4 The trick question: no runoff at all (exam trap)
Given: a watershed with \(CN = 60\) receives a small storm of \(P = 1.2\,\text{in}\). Find the runoff depth.
Solution:
- \(S = \frac{1000}{60} - 10\) = 6.67 in; \(I_{a} = 0.2 \times 6.67\) = 1.33 in
- Threshold check: \(P = 1.2\,\text{in}\) < \(I_{a} = 1.33\,\text{in}\). The storm never gets past interception, depression storage and early infiltration.
- Therefore \(Q = 0\) — the equation is not applied at all.
Answer: \(Q = 0\). Trap note: blind substitution returns \(\frac{(1.2 - 1.33)^{2}}{(1.2 + 0.8 \times 6.67)} \approx 0.003\,\text{in}\), because the squared numerator hides the negative sign. That small positive number is the distractor; the method's answer is exactly zero. The 0.2S check takes five seconds and is the entire content of this question.
Worked problem 5 Land-use change: pre- vs post-development (PE pace, US units)
Given: a site is developed from pasture \((CN 61)\) to a commercial district \((CN 85)\). For a design storm of \(P = 4.5\,\text{in}\), find the runoff depth before and after development.
Solution:
- Before: \(S = \frac{1000}{61} - 10\) = 6.39 in; \(I_{a} = 1.28\,\text{in}\). \(Q = \frac{(4.5 - 1.28)^{2}}{(4.5 + 0.8 \times 6.39)} = \frac{(3.22)^{2}}{(4.5 + 5.11)} = \frac{10.38}{9.61}\) = 1.08 in
- After: \(S = \frac{1000}{85} - 10\) = 1.76 in; \(I_{a} = 0.35\,\text{in}\). \(Q = \frac{(4.5 - 0.35)^{2}}{(4.5 + 0.8 \times 1.76)} = \frac{(4.15)^{2}}{(4.5 + 1.41)} = \frac{17.20}{5.91}\) = 2.91 in
- Increase: \(2.91 - 1.08\) = 1.83 in — the developed site sheds about 2.7 times the runoff depth of the pasture, from the same storm.
Answer: 1.08 in before, 2.91 in after — an increase of ≈ 1.83 in. Trap note: this is the standard detention-sizing setup — the extra depth times the site area is the storage the basin must hold. Candidates who compute only the post-development number have answered half the question; the stem asks for the change.
Frequently asked questions
What is the SCS curve number method?
An NRCS empirical method that estimates runoff depth from storm depth: Q = (P − 0.2S)²/(P + 0.8S) with S = 1000/CN − 10 in inches. The curve number CN encodes land use, cover condition and hydrologic soil group; the equation applies only when P > 0.2S.
How is a composite curve number calculated?
By area weighting: CN = Σ(CNi·Ai)/ΣAi. Never take a simple average of the patch values — it underweights large areas and overweights small ones, and it is the error the exam's distractors are built around.
When does the SCS equation give zero runoff?
When P ≤ Ia = 0.2S. The whole storm is absorbed before runoff begins, so Q = 0 — even though blind substitution returns a small positive number.
What are antecedent moisture conditions I, II and III?
Antecedent moisture conditions: I is dry, II is average (the condition table CNs are published for), III is wet. Convert with CN(I) = CN(II)/(2.281 − 0.01281·CN(II)) and CN(III) = CN(II)/(0.427 + 0.00573·CN(II)).
When is the SCS method used instead of the rational method?
SCS returns a runoff depth and volume for a storm — detention sizing, mixed or larger watersheds. Rational (Q = C·i·A) returns a peak discharge for small, fairly uniform catchments. Read what the stem asks for: depth/volume means SCS, peak flow usually means rational.
Free FE/PE flashcards + study tips, by email
Join the Water Resources Hub email list and get the free 40 water-resources flashcards (PDF + Anki) straight away, then study tips and practice problems by email. Email address only — no spam, unsubscribe any time.