Independent study aid. Not affiliated with or endorsed by NCEES. Always verify against the current NCEES exam specifications and reference handbook.
🎥 New: a free FE/PE worked-problems video every day — watch today’s video on YouTube

FE sections 10–11 of 16 · free theory

Structural Engineering

Structural Engineering on the FE Civil exam is mostly analysis you can do by hand: find the reactions, draw the shear and moment diagrams, check a deflection or a buckling load, and show you understand how loads travel through a structure and how steel and concrete members are sized at concept level.

FE foundation · Structural Analysis & Design (10–15)

Reactions, shear and moment diagrams

Almost every structural analysis question starts the same way: use equilibrium to find the support reactions, then build the shear diagram from the loads and read the moment diagram from the shear. For a simply supported beam the standard results are worth knowing cold:

\[\sum F_{x} = 0, \qquad \sum F_{y} = 0, \qquad \sum M = 0\]

\[M_{\max} = \frac{PL}{4} \text{ at midspan (central point load } P \text{)}\]

\[M_{\max} = \frac{wL^{2}}{8} \text{ at midspan (uniform load } w \text{)}\]

Pconcentrated (point) load
wuniformly distributed load, force per unit length
Lspan length
Mmaxmaximum bending moment

Shear is the integral of the load and moment is the integral of the shear: the moment is greatest where the shear crosses zero, and a point load causes a sudden jump in the shear diagram but only a kink in the moment diagram.

Determinacy and stability

Before analysing a structure, the exam expects you to judge whether it can be analysed with equilibrium alone — and whether it is stable at all. Count unknowns against equilibrium equations:

Planar structure: 3 equilibrium equations, \(\sum F_{x} = 0\), \(\sum F_{y} = 0\), \(\sum M = 0\)

Reactions \(r\) = equilibrium equations → externally determinate (if stable); \(r\) > equations → externally indeterminate

Pin support2 reactions (horizontal and vertical)
Roller support1 reaction (normal to the supporting surface)
Fixed support3 reactions (horizontal, vertical, and moment)

Determinate does not automatically mean stable. A structure with enough reactions can still be unstable if the reactions are all parallel or all pass through a single point, or if an internal arrangement forms a mechanism.

Deflections — standard handbook cases

The FE Reference Handbook tabulates deflections for the common beam cases, so most deflection questions are a matter of picking the right case, matching the load pattern exactly, and keeping \(E\) and \(I\) in consistent units:

\[\delta = \frac{PL^{3}}{48EI} \text{ at midspan (central point load, simply supported)}\]

\[\delta = \frac{5wL^{4}}{384EI} \text{ at midspan (uniform load, simply supported)}\]

δdeflection at the stated point
Emodulus of elasticity of the material
Imoment of inertia of the cross-section about the bending axis

Deflection varies with \(L^{3}\) for a point load and \(L^{4}\) for a uniform load — doubling the span multiplies the deflection by 8 or 16 respectively. Check that \(E\), \(I\), \(L\) and the load are all in one consistent unit system before calculating.

Column buckling

A slender column in compression can fail by buckling sideways well below the material’s compressive strength. Euler’s formula gives the critical load for an ideal, concentrically loaded column:

\[P_{cr} = \frac{\pi^{2}EI}{(KL)^{2}}\]

Pcrcritical (Euler) buckling load
Keffective length factor, set by the end conditions
KLeffective length of the column
Ismallest moment of inertia of the cross-section (buckling occurs about the weak axis)

Typical \(K\) values: pinned–pinned \(K = 1.0\); fixed–fixed \(K = 0.5\); fixed–free \(K = 2.0\). A larger \(K\) means a longer effective length and a much smaller buckling load, because \(P_{cr}\) varies with \(1/(KL)^{2}\).

Load paths and load combinations

Design questions at FE level test whether loads are followed correctly from where they are applied, through slabs, beams and girders, into columns and foundations — and whether the right factored combination has been used:

Tributary area × load per unit area = load carried by the supporting member

LRFD: factored load \(U\) from the governing combination of dead, live, wind, earthquake and other loads

ASD: service loads combined without load factors, checked against an allowable strength

Keep the two design philosophies separate: LRFD applies load factors to the loads and a resistance factor \(\phi\) to the strength, while ASD compares unfactored service loads with an allowable strength. Never mix a factored load with an allowable strength in the same check.

Steel and concrete design concepts

Full code design is beyond FE scope, but the handbook-level strength ideas appear regularly: a member is adequate when its factored (design) strength is at least the required strength from the load combinations:

\[\phi M_{n} \geq M_{u}\]

Mnnominal moment strength of the section
φMndesign (factored) moment strength
Murequired (factoured) moment from the load combinations
φstrength reduction (resistance) factor, less than 1.0

For steel, expect concept questions on yielding, lateral–torsional buckling and connection types; for concrete, on the roles of concrete in compression and reinforcing steel in tension, and on balanced, under-reinforced and over-reinforced behaviour. The FE tests the idea, not a full member design.

Worked example Simply supported beam with a central point load

Given: A simply supported beam of span \(L = 6\) m carries a central point load \(P = 24\) kN. Find the support reactions and the maximum bending moment.

Solution:

  1. By symmetry the two vertical reactions are equal: each reaction \(= P/2 = 24/2 = 12\) kN.
  2. Check equilibrium: \(12 + 12 - 24 = 0\) ✓.
  3. The maximum moment occurs at midspan, under the load: \(M_{\max} = PL/4 = (24)(6)/4 = 36\) kN·m.

Answer: Reactions 12 kN each; \(M_{\max} = 36\) kN·m at midspan.

Worked example Beam deflection under uniform load

Given: A simply supported beam carries a uniform load \(w = 10\) kN/m over a span \(L = 5\) m. \(E = 200\) GPa and \(I = 80 \times 10^{6}\) mm4. Find the maximum deflection.

Solution:

  1. Use the handbook case for a uniform load on a simply supported beam: \(\delta_{\max} = 5wL^{4}/(384EI)\), at midspan.
  2. Work in consistent units (kN and m): \(E = 200 \times 10^{6}\) kN/m2 and \(I = 80 \times 10^{6}\) mm4 \(= 80 \times 10^{-6}\) m4, so \(EI = (200 \times 10^{6})(80 \times 10^{-6}) = 16{,}000\) kN·m2.
  3. Substitute: \(\delta_{\max} = 5(10)(5)^{4} / (384 \times 16{,}000) = 31{,}250 / 6{,}144{,}000 = 0.00509\) m.

Answer: \(\delta_{\max} = 5.09\) mm downward.

Worked example Euler buckling of a steel column

Given: A pinned–pinned steel column (\(K = 1.0\)) is \(L = 4\) m long, with \(I = 20 \times 10^{6}\) mm4 and \(E = 200\) GPa. Find the critical buckling load.

Solution:

  1. Effective length: \(KL = (1.0)(4) = 4\) m.
  2. Convert \(I\): \(20 \times 10^{6}\) mm4 \(= 20 \times 10^{-6}\) m4, so \(EI = (200 \times 10^{9})(20 \times 10^{-6}) = 4.0 \times 10^{6}\) N·m2.
  3. Apply Euler’s formula: \(P_{cr} = \pi^{2}EI/(KL)^{2} = \pi^{2}(4.0 \times 10^{6})/(4)^{2} = 2.467 \times 10^{6}\) N.

Answer: \(P_{cr} = 2{,}467\) kN.