Independent study aid. Not affiliated with or endorsed by NCEES. Always verify against the current NCEES exam specifications and reference handbook.
🎥 New: a free FE/PE worked-problems video every day — watch today’s video on YouTube

Geotechnical — printable reference

USCS Soil Classification Chart — FE/PE Civil Exam Worked Examples

The complete Unified Soil Classification System as the exam actually tests it: the decision flowchart, the two-letter symbol code, the Cu/Cc well-graded criteria, the plasticity chart with the A-line, and the dual-symbol fines rules — with four fully worked classification problems and the traps the exam repeats.

Last reviewed: 2026-10-28. All worked examples were independently solved and cross-checked against ASTM D2487 criteria.

1 · The two-letter symbol code

Every USCS symbol is two letters. The first letter names the dominant soil; the second letter describes it:

First letterG = gravel, S = sand, M = silt, C = clay, O = organic
Second letterW = well-graded, P = poorly-graded, M = silty, C = clayey, L = low plasticity \((LL < 50)\), H = high plasticity \((LL \ge 50)\)

Read the pair as a sentence: SW = well-graded sand — never "gravelly sand" (a common mislabelling online). SC = clayey sand. The second letter refines, it never renames the soil. Symbols like GH or SH do not exist in USCS — the correct clayey symbols are GC and SC.

2 · Coarse or fine: the No. 200 (0.075 mm) 50% rule

% retained on No. \(200 = 100\) − % passing No. 200

≥ 50% retained on No. 200coarse-grained → go to Step 3 (gravel vs sand)
> 50% passing No. 200fine-grained → go straight to the plasticity chart \((Step 4 b)\)

The No. 200 sieve opening is 0.075 mm — the sand/silt boundary. The exam almost always gives the percent passing, so convert first: 45% passing means 55% retained, which is coarse-grained. Getting the direction backwards is the single most common USCS error.

3 · Gravel or sand: the No. 4 (4.75 mm) split

% of coarse fraction retained on No. 4 = (% retained on No. 4) ÷ (% coarse fraction)

≥ 50% of the coarse fraction retained on No. 4gravel (G)
< 50% of the coarse fraction retained on No. 4sand (S)

The denominator is the coarse fraction only, not the whole sample — the fines are already accounted for. Example: a sample with 55% retained on the No. 4 sieve and 70% coarse fraction total gives \(\frac{55}{70} = 78.6\%\) of the coarse fraction retained on No. 4 → gravel.

4 · Well-graded criteria: Cu and Cc

\[C_{u} = \frac{D_{60}}{D_{10}}\] \[C_{c} = \frac{(D_{30})^{2}}{(D_{10} \cdot D_{60})}\]

\(D_{10}\), \(D_{30}\), \(D_{60}\)grain diameters at which 10%, 30%, 60% of the sample is finer (read from the gradation curve)
Well-graded gravel (GW)\(C_{u}\) ≥ 4 and \(1 \le C_{c} \le 3\)
Well-graded sand (SW)\(C_{u}\) ≥ 6 and \(1 \le C_{c} \le 3\)
Otherwisepoorly-graded → GP or SP (fails either test → poorly graded)

Both tests must pass for W. A soil with \(C_{u} = 12\) but \(C_{c} = 0.5\) is still P — "poorly graded" includes gap-graded soils that ace the \(C_{u}\) test. Mnemonic for the cutoffs: the smaller grains need the bigger number (sand 6, gravel 4).

5 · The fines rules: < 5%, 5–12%, > 12%

< 5% passing No. 200clean → classify by gradation only: GW/GP or SW/SP
5–12% passing No. 200dual symbol → gradation part + fines part: e.g. SW-SM, GW-GC
> 12% passing No. 200fines control → GM/GC or SM/SC — the fines' plasticity (M vs C from the A-line) decides the second letter

For a dual symbol, the first half still uses the \(\frac{C_{u}}{C_{c}}\) gradation test and the second half still uses the A-line — you do both mini-classifications and join them.

6 · The plasticity chart and the A-line

\[PI = LL - PL\] A-line: \(PI = 0.73 \cdot (LL - 20)\)

Plot (LL, PI) above the A-lineclayey → C
Plot below the A-linesilty → M
\(LL \ge 50\)high plasticity → H
\(LL < 50\)low plasticity → L

Watch the boundary: PI exactly on the A-line is decided by the narrow CL-ML dual zone (PI between 4 and 7, \(LL < 50\)) — and a PI only 0.5 above the line is still clayey. The exam loves giving values that land just above or below the line, so compute the A-line PI and compare digits, don't eyeball.

Worked examples — four classifications, every branch

Worked example Classify from the sieve data (US units)

Given: a soil with 30% passing the No. 200 sieve and 55% retained on the No. 4 sieve.

Solution:

  1. Retained on No. \(200 = 100 - 30\) = 70% ≥ 50% → coarse-grained.
  2. Of the coarse fraction, retained on No. \(4 = \frac{55}{70}\) = 78.6% ≥ 50% → gravel (G).
  3. Fines = \(30\% > 12\%\) → gravel with fines → symbol is GM or GC; the fines' plasticity (A-line) decides which — it cannot be fixed from sieve data alone.

Answer: gravel with fines — GM or GC pending the Atterberg limits. The trap answers are "SW" (wrong first letter — this is a gravel, not a sand) and GP (that requires < 5% fines; here fines are 30%).

Worked example The \(\frac{C_{u}}{C_{c}}\) well-graded check

Given: a clean sand (< 5% passing the No. 200 sieve) with \(D_{10} = 0.08\,\text{mm}\), \(D_{30} = 0.35\,\text{mm}\), \(D_{60} = 1.2\,\text{mm}\).

Solution:

  1. \(C_{u} = \frac{D_{60}}{D_{10}} = \frac{1.2}{0.08}\) = 15.0 ≥ 6 ✓
  2. \(C_{c} = \frac{(0.35)^{2}}{(0.08 \times 1.2)} = \frac{0.1225}{0.096}\) = 1.28 → \(1 \le 1.28 \le 3\) ✓
  3. Both pass, and it is a sand → SW.

Answer: SW — well-graded sand. If either test had failed the answer would be SP, not something in between. Note the units cancel in both ratios, so D-values in mm work unchanged.

Worked example Plasticity chart — the close call

Given: 80% of a sample passes the No. 200 sieve. \(LL = 55\), \(PL = 30\).

Solution:

  1. 80% passing → > 50% → fine-grained.
  2. \(PI = LL - PL = 55 - 30\) = 25.
  3. A-line at \(LL = 55\): \(PI = 0.73 \times (55 - 20) = 0.73 \times 35\) = 25.55. Plotted PI \((25)\) is just below the line → silty → M.
  4. \(LL = 55 \ge 50\) → high plasticity → H.

Answer: MH — elastic silt. This is the exam's favourite shape of question: 25 vs 25.55 is a half-point margin, so the trap answer CH ("obviously a clay") only loses to the arithmetic. Always compute the A-line PI — never guess which side.

Worked example Dual symbol — sand with silty fines

Given: 8% passing the No. 200 sieve; the coarse fraction is predominantly sand; \(D_{10} = 0.12\,\text{mm}\), \(D_{30} = 0.50\,\text{mm}\), \(D_{60} = 2.0\,\text{mm}\); the fines plot below the A-line.

Solution:

  1. 92% retained on No. 200 → coarse-grained; sand → S family.
  2. 8% fines is in the 5–12% band → dual symbol.
  3. Gradation half: \(C_{u} = \frac{2.0}{0.12}\) = 16.7 ≥ 6 ✓; \(C_{c} = \frac{(0.50)^{2}}{(0.12 \times 2.0)} = \frac{0.25}{0.24}\) = 1.04 → \(1 \le 1.04 \le 3\) ✓ → well-graded → SW.
  4. Fines half: below the A-line → silty → SM.

Answer: SW-SM — well-graded sand with silt. If the fines had plotted above the A-line the second half would be SC instead: SW-SC. The gradation half and the fines half are computed independently, then joined.

Free 3-question mini-quiz

Test the sheet

1. A lab report states 45% of a sample is retained on the No. 200 sieve. The soil is:

2. A clean sand (3% passing No. 200) has D10 = 0.10 mm, D30 = 0.40 mm, D60 = 1.0 mm. Classify it.

3. A fine-grained soil has LL = 40 and PL = 25. Its USCS symbol is:

Ready for the complete 110-question rehearsal?

Step up from this three-question taster to the flagship 5-hour-20-minute timed simulation across every FE Civil section, with detailed solutions.

Frequently asked questions

What does the 50% rule on the No. 200 sieve decide?

Whether the soil is coarse-grained or fine-grained: if 50% or more of the sample is retained on the No. 200 sieve (0.075 mm), it is coarse-grained (gravel or sand). If more than 50% passes the No. 200, it is fine-grained (silt or clay). The trap is remembering that the percentage given is usually the percent passing, so subtract from 100 first.

How do I remember the Cu cutoffs for well-graded soil?

Cu ≥ 4 for gravel, Cu ≥ 6 for sand — plus 1 ≤ Cc ≤ 3 in both cases. Mnemonic: the smaller grains need the bigger number. Gravel is coarser, so it only needs Cu ≥ 4 to count as well-graded; sand needs Cu ≥ 6.

When do I use the plasticity chart and the A-line?

For any fine-grained soil (more than 50% passing the No. 200 sieve), and to decide between M and C in the "soil with fines" branch of coarse soils. Compute PI = LL − PL, then compare against the A-line PI = 0.73(LL − 20): plot above the line and the fines are clayey (C); below, silty (M). Then LL ≥ 50 gives H (high plasticity), LL < 50 gives L (low plasticity).

What is a dual symbol like SW-SM?

When the percent passing the No. 200 sieve is between 5% and 12%, the soil has too many fines to be clean but too few to be called "with fines" outright, so it gets a dual symbol: the gradation part first (SW, SP, GW, GP from the Cu/Cc check) joined to the fines part (M or C from the plasticity chart). Below 5% fines it is clean; above 12% the fines control and it is SM/SC or GM/GC.